BS EN 10268-2006 Cold rolled steel flat products with high yield strength for cold forming Technical delivery conditions
|
ID： |
A42BB77D17EB4E4EB4199FE046927D32 |
|
文件大小(MB)： |
0.2 |
|
页数： |
16 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10268:2006,Cold rolled steel flat,products with high,yield strength for cold,forming — Technical,delivery conditions,The European Standard EN 10268:2006 has the status of a British,Standard,ICS 77.140.50, , , ,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Jun 28 17:59:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 10268:2006,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 29 September 2006,. BSI 2006,ISBN 0 580 48667 2,National foreword,This British Standard was published by BSI. It is the UK implementation of,EN 10268:2006. It supersedes BS EN 10268:1999 which is withdrawn.,The UK participation in its preparation was entrusted to Technical Committee,ISE/10, Flat rolled steels products.,A list of organizations represented on ISE/10 can be obtained on request to its,secretary.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard cannot confer immunity from,legal obligations.,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Jun 28 17:59:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10268,July 2006,ICS 77.140.50 Supersedes EN 10268:1998,English Version,Cold rolled steel flat products with high yield strength for cold,forming - Technical delivery conditions,Produits plats laminés à froid à haute limite d'élasticité pour,formage à froid - Conditions techniques de livraison,Kaltgewalzte Flacherzeugnisse aus St鋒len mit hoher,Streckgrenze zum Kaltumformen - Technische,Lieferbedingungen,This European Standard was approved by CEN on 12 June 2006.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2006 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10268:2006: E,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Jun 28 17:59:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EN 10268:2006 (E),2,Contents,Foreword3,1 Scope .4,2 Normative references ..4,3 Terms and definitions .5,4 Designation 5,5 Requirements 6,5.1 Steelmaking and manufacturing processes .6,5.2 Chemical composition 6,5.3 Delivery conditions6,5.4 Mechanical properties.7,5.5 Surface characteristics ..9,5.5.1 General..9,5.5.2 Surface quality .9,5.5.3 Surface finish 9,5.6 Suitability for surface coating .9,5.7 Weldability10,5.8 Tolerances on dimensions and shape 10,6 Tests.10,6.1 General10,6.2 Inspection units 10,6.2.1 Products of rolled width ≥ 600 mm10,6.2.2 Products of rolled width < 600 mm 10,6.3 Number of tests.10,6.4 Sampling10,6.5 Test methods..11,6.6 Chemical analysis11,6.7 Retests 11,6.8 Inspection document.11,7 Marking ..11,7.1 Products of rolled width ≥ 600 mm11,7.2 Products of rolled width < 600 mm 11,8 Packing ..11,9 Disputes.11,10 Information to be supplied by the purchaser at the time of enquiry and order 12,Bibliography .13,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Thu Jun 28 17:59:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EN 10268:2006 (E),3,Foreword,This document (EN 10268:2006) has been prepared by Technical Committee ECISS/TC 13 “Flat products for cold,working - Qualities, dimensions, tolerances and specific tests”, the secretariat of which is held by IBN.,This European Standard ……
……